Splash Panel for Engine Room Electronics

I (Jon) finished these jobs variously Dec. 23rd, Jan. 10th and March 17th.

I made a splash panel to cover all of the electronics for our power generation. Water had been dripping onto the solar regulator, which is bad, so I covered the wind gen, solar, and tow gen regulators and shunts with a clear acrylic cover.

There is a perfect hole cut in the panel for the wind generator switch which allows you to apply the brake to the wind generator. There is a less then perfect slot cut in the panel allowing access to the switch to turn on and off the solar panels. I didn’t want to put the switch on the outside of the panel as then if you wanted to take off the panel, it would be more of a pain in the ass. The solar switch is mounted to a wood block and screwed to the wall.